Hi , to all members as we all know that delta pulse 3 is not stable and bad results , delta pulse 3s stable but only for sell so the best way is the developped delta pulse 2 with latest stable program of lcd for discrimination so you will find here :
Schematics & pcb printed & placements & compenents list for (delta pulse 2 + Lcd ) & hex file latest and stable from here
You are not allowed to view links.
Please Register or Login
http://www.teknolojiekibi.com/yeni/index.php?topic=3782.0
& coil.txt contains all types of coil and how to make & images of finished dp2+lcd & snapshot of the software with preferances to success the program of the pic , i have read all the topic in turkish and i will post all my knowledge !
1- for the discrimination this program is stable and latest from
You are not allowed to view links.
Please Register or Login
http://www.teknolojiekibi.com/yeni/i...p?topic=3782.0
to proram the pic PIC18F252 you should use the software attached and the file disc.hex attached and follow as on image attached too and of course you should have the device . (For vista/7 users Right click => Run as Admiistrator)
2- to attach the lcd with the delta pulse 2 pcb just shunt "P1,P2,P3,P4,P5,P9" from lcd pcb to "P1,P2,P3,P4,P5,P9" delta pulse pcb attached too on attachements.
3-THIS IS THE IMPORTANT STEP AFTER YOU FINISH YOU SHOULD DO THIS STEP BECAUSE WITHOUT IT IT WILL NOT BE ANY DISCRIMINATION RESULT ON LCD :
3-a the signal Potentiometer of delta pulse should be turned at 1/3
3-b there is two variable Potentiometers on lcd board named tr1,tr2 (10K) we need only TR1 situated on the left of TL081 after you start delta pulse with wired lcd and programed PIC18F252 , turn this TR1 (left of tl081) to clockwise until the end , then reverse (turn counter-clockwise) and while you are turning counter-clockwise watch on lcd till you see two progress bars full with (word FULL) now push the button tune of the lcd not of the delta pulse 2 then test the device if still no discrimination , as is the position of tr1 and you pushed tune of lcd continue turning counter-clockwise till you see full progress bar with the word (FULL) then re push the tune of lcd now the discrimination should work if still not working repeat this last time if still not working be sure that the problem is on pic programmation (this is the tutorial and notes from Karadağ not mine)
here is a video of this tutorial shown by Karadağ
You are not allowed to view links.
Please Register or Login
Delta Pulse 2 Test
Other notes :
Try to use lcd winstar 2x16 is the one that used by Karadağ because it exists bad lcd slowly .
try to use compenents as listed if you dont find them ask Karadağ for replacement he is a good person he will answer you
for the limitation of 200 it exists a crack but does not matter you have just unplug the pic then re-program it then re-plug it
many members from teknologiekibi have successed with good and stable discrimination
i can not attach file bigger then 500k here so here is link of download
You are not allowed to view links.
Please Register or Login
https://drive.google.com/file/d/0B9VhMwS_ZmNcdXRmZ2dOVEJBX2M/edit?usp=sharing
please if any member here has successed this project or any other tricks or suggestions or notes post here !
Best Regards !
K3rnel31
Linkback: You are not allowed to view links.
Please Register or Login
http://www.thunting.com/smf/index.php/topic,57865.msg282523.html#msg282523
|
|
Logged
|
|
