Compass Yukon 94B Repair

     I don't know if these were TR, VLF, BFO or what.....with the nail rejection I would say TR, but seem too strong for that, stable..... it is all metal though, with a nice feel through the handle, and round-sound wahwahs...     =
    Some time ago I came across 2 fairly old Compass metal detectors, one was a Yukon 99-1b and the other a 94b.  The 99-1b appeared to be the most intact, except there was a layered resistor/potentiometer which had become toast because both of these machines had been outside for awhile, some months.  Fortunately that was in the desert sw and not Florida. 
     I tried to rebuild the potentiometer, had three hours in the project, no luck, and then during desolder I killed the small auxiliary circuit board that the potentiometer was attached to.  The batteries on that machine were weird, either three packs of 4 AA, or two packs of 4 AA and a 9 volt. 
     I tried various configurations and found some info online which helped a lot, thanks, but I could not get past the damaged parts.  This detector did come in handy with the other detector, who had somehow along the line lost all its battery leads.  It was a lot of hit and miss but I was able to use the wiring config of the 99-1b to figure out the configuration of the 94b, and even though I fried one resistor which I have yet to replace the thing fires up and is strong, it gets  quarter easy at ten inches in the air.  It has  double d wide scan coil.  I have never used  Compass before but plan on putting this to use as  backup or dedicate it to the truck.  The 94B had one 4 pack of AA and one 9 volt, and though it looks like there was room for a 6pack of AA, the four pack works real well.  Then there is a little receptacle obviously for a 9volt which  9 volt fits in perfectly.

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,72594.msg332760.html#msg332760

Thank you, and I found a treasure trove of old compass information at treasurelinx.com, they are just fun to read too, they have a lot of stuff.  After reading I see they are TR, very strong, very in line with my idea of circuitry and power.  Have been looking into making circuit boards for high power stuff, the compass circuit boards are very nice....thank you again.....b

Linkback:

You are not allowed to view links.
Please Register or Login

http://www.thunting.com/smf/index.php/topic,72594.msg332770.html#msg332770